Corrosion & Material Selection for Oil Well Production Downhole Tubing Masterclass 2022
12 November 2013 - 14 November 2013
Manila, Phillippines

Your Expert Trainer

International Corrosion and Material Management ExpertOver 25 years of experience

He has several years of experience in the fields of asset integrity management, corrosion control of process equipment and process safety management. He previously held senior positions with or..

About Your Expert Trainer

Program Overview

Production tubing is the conduit through which fluids are transported from the reservoir to the surface facilities. The tubing has to withstand corrosion from any aqueous phase produced with hydrocarbons and containing dissolved acid gases (e.g., CO2 and H2 S) and salts (e.g., chloride ions). Corrosion control & effective material selection is essential for maintaining production and avoiding the risk of loss of well control Corrosion & Material Selection for Oil Well Production Downhole Tubing (PDT)

Equip Global’s 5-day practical Corrosion & Material Selection for Oil Well Production Downhole Tubing masterclass will teach you everything that you need to know in order to gain knowledge and best practices on all techniques to ensure corrosion and material selection for oil well production downhole tubing. A must- attend!


10 Key Benefits of Attending

  • Learn how to plan and develop an effective material selection approach
  • Ensure you understand applicable standards and guidelines for oil well production downhole tubing corrosion and material selection 
  • Understand chemical composition of production fluids, and the effect of specific factors on corrosion mechanisms
  • Learn about production system corrosivity, production fluid process conditions and the material of construction of PDT
  • Gain knowledges on corrosion management best practices including corrosion resistant alloys, non-metallic DPT and corrosion & damage mechanisms PDT
  • Learn about carbon dioxide, H2S, Oxygen, Micro-Biologically Induced Corrosion management and control options
  • Adopt best practices in corrosion rate prediction, inhibitors, chemical treatment and the analysis of CRA corrosion behaviour
  • Learn corrosion monitoring, identification & screening of candidate materials
  • Gain knowledge on procurement, supply, economic and life cycle cost management of oil well production downhole tubing to improve your corrosion and material selection process
  • Hear case studies and lessons learned globally on this important subject matter


This masterclass is aimed at all industry professionals & engineers across oil and gas, chemical, petrochemicals and energy industry with a professional interest & responsibility in corrosion management, material selection and asset integrity management of oil well production downhole tubing including the following departments:

  • Corrosion
  • Corrosion Management
  • Corrosion Control
  • Material Selection
  • Material Control
  • Maintenance
  • Asset Management
  • Asset Integrity Management
  • Process Safety Management
  • Well intervention
  • Exploration & Production
  • Coiled Tubing
  • Downhole Tubing
  • QA/QC
  • Piping
  • Mechanical Engineering

Like More information?

Email us at for more information

Register Now
Register by 15th July 2022 for EARLY BIRD DISCOUNTED RATES!

Knowledge Center

Visit the Download Centre to access related reports, articles, interviews and other useful resources

Quick Links

PIC – 40% cash back when you register for an Equip Global Conference or Training Course

The objectives of the PIC Scheme are the same as those of Equip Global. Both support investment in innovation, productivity and continuous training.

If you are a registered business in Singapore, you can enjoy huge huge tax savings in the form of cash payouts and/or tax deductions when you invest in training of employees. Your attendance at any Equip Global conference or training course is eligible for PIC credits, either as a 40% cash refund or 400% tax deduction. We will provide you with full supporting documentation after the event and assist you in getting the claim completed.

Continuous training and upgrading of your employees is key to the success of your organization. What’s more, boost your tax savings and claim 40% of your registration fee by attending an Equip Global conference or training course today. To do so, follow this simple 5 minute process:

  1. Select, register and pay for your conference/training course of your choice
  2. Complete the PIC form which you can download here:
  3. Attend the event, learn and network with industry peers
  4. File your receipt (which we will email you), record of attendance (which we will provide you at the event) and the completed PIC form with your accounts department which they will submit to IRAS to process the claim. If you do not have an accounts department or need help with the PIC claim, our staff will be very happy to assist.

Take advantage of the PIC scheme to upgrade your skills, gain the latest information in your field of work, and get access to the knowledge that can help drive your organizations’ performance and productivity.

For more information visit Terms and conditions apply.

Tell a Colleague

Corrosion & Material Selection for Oil Well Production Downhole Tubing Masterclass 2022
07 November 2022 - 11 November 2022
  • Thank you. We have sent an email with the event details to your colleague.
    [ Close Popup]
Copyright EquipGlobal 2017 All Rights Reserved